浏览正文,请点击 → 【关闭】
设为首页 | 加入收藏 | 联系我们
STANDARD123.COM -- 全球标准&认证知识个人分享网站

推荐阅读:全球标准认证知识导图 (15年行业经验总结)
提供全球各国证书有效性查询
--包括UL,VDE,TUV,SAA,CSA,SGS,CB,ETL,BSI等证书查询及各国法规查询网址列表!
| 首页 | 欧洲认证 | 亚洲认证 | 北美洲认证 | 南美洲认证 | 大洋州认证 | 非洲认证 | 国际认证 | 认证专题 | 认证代理 | 标准阅览
当前位置:首页 >> 全球标准认证 >> 认证专题 >> 零部件标准 >> 正文


[变压器] 变压器/电源/开关电源的区别




来源: 点击数:10  录入时间:09-05-10 08:49:43

The distinction between transformers, power supplies and switch mode power supplies is as follows:
变压器/电源/开关电源的区别:

– for transformers, there is no change in frequency.However,transformers(e.g  constant voltage transformers) may have an internal resonance frequency not exceeding 30 kHz;
变压器的频率是不变的.但其可能有一个不超过30K内部的共振频率

– for power supplies, the internal operational frequency and waveform are different from the supply frequency and waveform, and the internal operational frequency does not exceed 500 Hz
电源的内部工作频率及波形与主线的频率和波形是不一样的, 其内部频率不超过500

– for switch mode power supplies, the internal operational frequency and waveform are different from the supply frequency and waveform and the internal operational frequency exceeds 500 Hz and does not exceed
100 MHz 。
开关电源的内部工作频率及波形与主线的频率和波形是不一样的, 其内部频率超过100M




享受分享的乐趣↓

 

   
  ·上一篇文章:[开关] 开关的选用及使用指南
  ·下一篇文章:什么是自攻螺丝,自攻螺丝的种类及发展历程
 
相关文章: 图片资讯:
>> 滚动更新
最近更新
热门文章
推荐文章
友情链接:[国际标准化组织(ISO)] [国际电工委员会(IEC)] [欧洲电工标准化委员会(CENELEC)] [欧洲标准化委员会(CEN)] [国家质量监督检验检疫总局(AQSIQ)]
          [国家认证认可监督管理委员会(CNCA)] [中国合格评定国家认可委员会(CNAS)] [中国质量认证中心(CQC)]
Copyright 2006-2021 Standard123.com Inc. All rights reserved. 版权所有 粤ICP备06119707号
联系方式:HDUU@MSN.COM(MSN) 电子邮箱: Webmaster@standard123.com