EN 60947-4-2
|
Low-voltage switchgear and controlgear --
Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
|
EN 60947-4-3
|
Low-voltage switchgear and controlgear --
Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
|
EN 60947-5-1
|
Low-voltage switchgear and controlgear --
Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
|
EN 60947-5-2
|
Low-voltage switchgear and controlgear --
Part 5-2: Control circuit devices and switching elements - Proximity switches
|
EN 60947-5-3
|
Low-voltage switchgear and controlgear --
Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
|
EN 60947-5-6
|
Low-voltage switchgear and controlgear --
Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
|
EN 60947-5-7
|
Low-voltage switchgear and controlgear --
Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
|
EN 60947-6-1
|
Low-voltage switchgear and controlgear --
Part 6-1: Multiple function equipment - Automatic transfer switching equipment
|
EN 60947-6-2
|
Low-voltage switchgear and controlgear --
Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
|
EN 60947-8
|
Low-voltage switchgear and controlgear --
Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
|
EN 60974-10
|
Arc welding equipment --
Part 10: Electromagnetic compatibility (EMC) requirements
|
EN 61000-3-2
|
Electromagnetic compatibility (EMC) --
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
|
EN 61000-3-3
|
Electromagnetic compatibility (EMC) --
Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
|
EN61000-3-11
|
Electromagnetic compatibility (EMC) --
Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
|
EN 61000-6-1
|
Electromagnetic compatibility (EMC) --
Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
|
EN 61000-6-2
|
Electromagnetic compatibility (EMC) --
Part 6-2: Generic standards - Immunity for industrial environments
|
EN 61000-6-3
|
Electromagnetic compatibility (EMC) --
Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
|
EN 61000-6-4
|
Electromagnetic compatibility (EMC) --
Part 6-4: Generic standards - Emission standard for industrial environments
|
EN 61008-1
|
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) -- Part 1: General rules
|
EN 61009-1
|
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) --
Part 1: General rules
|
EN 61036
|
Alternating current static watt-hour meters for active energy (classes 1 and 2)
|
EN 61037
|
Electricity metering - Tariff and load control - Particular requirements for electronic ripple control receivers
|
EN 61038
|
Electricity metering - Tariff and load controls - Particular requirements for time switches
|
EN 61131-2
|
Programmable controllers --
Part 2: Equipment requirements and tests
|
EN 61131-2
|
Programmable controllers --
Part 2: Equipment requirements and tests
|
EN 61204-3
|
Low voltage power supplies, d.c. output --
Part 3: Electromagnetic compatibility (EMC)
|
EN 61268
|
Alternating current static var-hour meters for reactive energy (classes 2 and 3)
|
EN 61326
|
Electrical equipment for measurement, control and laboratory use - EMC requirements
|
EN 61543
|
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
|
EN 61547
|
Equipment for general lighting purposes - EMC immunity requirements
|
EN 61800-3
|
Adjustable speed electrical power drive systems --
Part 3: EMC product standard including specific test methods
|
EN 61812-1
|
Specified time relays for industrial use --
Part 1: Requirements and tests
|
EN 62052-11
|
Electricity metering equipment (AC) - General requirements, tests and test conditions --
Part 11: Metering equipment Note 9
|
EN 62053-11
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
|
EN 62053-21
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 21: Static meters for active energy (classes 1 and 2)
|
EN 62053-22
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
|
EN 62053-23
|
Electricity metering equipment (a.c.) - Particular requirements --
Part 23: Static meters for reactive energy (classes 2 and 3)
|
EN 12015
|
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission
|
EN 12016
|
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity
|
EN 12895
|
Industrial trucks - Electromagnetic compatibility
|
EN 13309
|
Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply
|
EN 300 386 V.1.2.1
|
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
|
EN 300 386
V.1.3.1
|
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
|
EN 300 386
V.1.3.2
|
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
|
EN 300 386-2 V1.1.3
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard
|
EN ISO 14982
|
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
|